SS 316 Knitted Wire Mesh Distillation Dolumn Metal Structured Tower Packing
Metal Structured Packing Introduction
Corrugated Sheet Metal Structured Packings is generally used in medium to small diameter columns for separations that require a maximum number of theoretical stages in the minimum column height. As there are many small spines due to surface pitting, the separation efficiency are improved with prolonged retention time on the surface and more sufficient exchange of vapor and liquid drop. The diameter of the filler hole is 0.4 ~ 0.5mm, which is usually made of ultra-low carbon corrosion resistant stainless steel material, used for oil industry, fine chemical industry, pharmaceutical equipment, etc.
Metal Structured Packing Technical Specification
The specification is based on SS304 material:
| Model | Wire Gauze Structured Packing |
| Material | SS 304, 304L, 410, 316, 316L, etc. |
| Model | Specific surface | Bulk density | Void ratio | Obl. | ΔP | Theo. plate | HETP/mm | F factor m/s (kg/m3)0.5 |
| | (m2/m3) | (kg/m3) | (%) | angle | (Pa/plate) | (piece/m) | | |
| 250AX | 250 | 125 | 95 | 30 | 100-400 | 2.5~3 | 100 | 2.5-3.5 |
| 500BX | 500 | 250 | 90 | 30 | 400 | 4~5 | 200 | 2.0-2.4 |
| 700CY | 700 | 350 | 85 | 45 | 600-700 | 8~10 | 333-400 | 1.5-2.0 |
| | | | | | | | | |
| Typical Application | Absorption, scrubbing and stripping services |
| |
| Package : | Carton box; wooden box |
| Warranty: | a) By National Standard HG/T 4374-2012; HG/T 21556.1-1995 |
| | b) Offer lifetime consultation on problems occurred |
250(AX), Precision rectification for high productive capacity and less theoretical plate number.
500(BX), Vacuum rectification for thermosensitive system and hard separation system, especially suitable for rectification with pressure lower than 7Kpa.
700(CX), Separation of isotopic compound and isomeric compound.
Metal Structured Packing Advantages
- High number of theoretical plates, large flux and low pressure drop;
- Good performance with low working load, increased number of theoretical plates with the decrease of gas load, and there is almost no bottom limit of work load;
- Large operation elasticity;
- No obvious amplification effect;
- Fulfilling the requirements of precision, large and high vacuum distillation units, providing favorable conditions for distillation separation system, heat sensitive material and high purity products.
Metal Structured Packing Application
Refinery columns (atmospheric and under vacuum).
Petrochemical columns.
Natural gas glycol dehydration.
Wastewater treatment stripping columns.
Atmospheric pressure and high pressure columns.
FAQ
Q: Are you a manufacturer?
A: Yes,we have specialized in this field for about 10 years experience.
Q: Could you provide sample?
A: Yes,we can provide sample together with our catalogue. But the courier charge will on your side. We'll send back the courier charge if you make an order.
Q: What information should I provide,if I want a lowest quotation?
A: The specification of wire mesh.such as material,mesh number, wire diameter,hole size,width,quantity,finishing.
Q: How is your delivery time?
A: We always prepare enough stock material for your urgent requirement. the delivery time is 7days for all the stock material.
We'll check with our production department for the non-stock items to offer you the exact delivery time and producing schedule.
Q: How do you ship the finished wire mesh?
A:Usually by sea.
Q: What is the payment?
A:We usually use the T/T,L/C,D/P,Western Union.
Our Company
Product Tags:
|
|
Knitted Wire Mesh Distillation Dolumn 250Y Metal Structured Packing SS 316 Images
|
